1x12 Bookcase with Wainscoting Back
Build a bookcase out of 1x12 boards - this is a with cut list, shopping list and diagrams.

What you need
- 3 - 1x12 @ 10 feet long
- 1 - 1x3 @ 10 feet long
- 1/4″ Beadboard, cut at 41 1/2″ wide x 32 1/2″ high
- 1 - 1x2 @ 12 feet long
- 1 - 1x4 @ 6 feet long
- A) 2 – 1×12 @ 32 1/2″ (Sides)
- B) 2 – 1×12 @ 40″ (Shelves)
- E) 1- 1×2 @ 40″ (Footer Support)
C) 1 – 1×3 @ 40″ (Front top trim)
D) 1/4″ Beadboard, cut at 41 1/2″ wide x 32 1/2″ high
F) 2 – 1×4 @ 11 1/2″ on the shortest points, mitered (Side Footers – Router out the top edge with an ogee bit or purchase 4″ base mouldings)
G) 1 – 1×4 @ 41 1/2″ at the shortest points, mitered (Front Footer – Router out the top edge with an ogee bit or purchase 4″ base mouldings)
H) 1 – 1×2 @ 44 1/2″ (Back Tabletop)
I) 1 – 1×12 @ 44 1/2″ (Front Tabletop)
- measuring tape
- square
- safety glasses
- hearing protection
- drill
- circular saw
- nailer
- sander
Step by step
Step 1
Fastens the shelves, B, to the sides, A, as shown above.

Step 2
Add the Front Top Trim piece, C, as shown above. Keep outside edges flush.

Step 3
Add the beadboard, D, to the back as shown above.

Step 4
Add the footer support as shown above. Keep front edge flush.

Step 5
Add the back tabletop piece, H.

Step 6
Then the front tabletop, I, and you are done with the framing.

Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.



