1x3 Furring Strip Cake Stand

Get the tall, tiered cake look - without all the cakes! This tiered cake stand will elevate your single cake, without dealing with layers of cakes to stack and eat. Build a rustic wood cake stand with 1x3 furring strips. This is a free project plan with detailed diagrams and photos to build your own cake stand. This cake stand can be either built as a 10", 12",or build both and stack for a grand cake display. You'll just need inexpensive 1x3 furring strips, some brad nails and glue, and your favorite stain to build these cake stands.

1x3 Furring Strip Cake Stand

Dimensions

Use the size-specific shopping and cut lists below.

1x3 Furring Strip Cake Stand dimension diagram 1

What you need

    10" Cake Stand Shopping List

  • 1 - 1x3 @ 8 feet long
  • 1-1/4" brad nails
  • wood glue
  • wood stain
  • 12" Cake Stand Shopping List

  • 1 - 1x3 @ 8 feet long
  • 1-1/4" brad nails
  • wood glue
  • wood stain

Step by step

01

Step 1

1x3 Furring Strip Cake Stand, step 1
02

Step 2

1x3 Furring Strip Cake Stand, step 2
03

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.