Chalkboard Produce Crate

to build a chalkboard produce crate.

Chalkboard Produce Crate

Dimensions

Use the size-specific shopping and cut lists below.

Chalkboard Produce Crate dimension diagram 1

What you need

  • 2 - 1x3 @ 8 feet long
  • 1 - 1x2 @ 2 feet long
  • 1/4" plywood scraps for bottom and chalkboards
  • 1 1/4" pocket hole screws
  • finish nails or more 1 1/4" pocket holes for attaching sides

  • wood glue
  • chalkboard paint

Step by step

01

Step 1

Start by making your two ends. Drill handles out with drill bits and then connect the two holes with a jigsaw to cut out handles. I built the ends with 3/4" pocket holes and 1 1/4" pocket hole screws - just a single screw per each end of the 1x2s and glue. Lay flat to dry.

Chalkboard Produce Crate, step 1
02

Step 2

Then for the sides you can attach with nails or pocket holes from the insides. I used 1x3s for the sides because they are so cheap, but you could also use 1x8s or any other board width.

Chalkboard Produce Crate, step 2
03

Step 3

Then I just attached the 1/4" plywood to the bottom with finish nails and glue.

Chalkboard Produce Crate, step 3
04

Step 4

Then glue the chalkboard pieces into ends to secure in place.

Chalkboard Produce Crate, step 4
05

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.