Factory Cart Coffee Table

to build your own factory cart inspired coffee table! This plan features step by step diagrams, shopping and cut list, and lots of reader submitted photos to help you build your own industrial coffee table. Coffee table details - all pine wood boards, simple joinery techniques, a oversized but slightly lower version (depending on caster wheels) - this coffee table is a great way to add tons of rustic warm to your living space without cost a ton! Free.

Factory Cart Coffee Table

Dimensions

Use the size-specific shopping and cut lists below.

Factory Cart Coffee Table dimension diagram 1

What you need

  • 1 - 1x8 @ 10 feet long (cut sides)
  • 3 - 1x8 @ 8 feet long (cut ends and tops)
  • 1 - 2x4 @ 8 feet long
  • 1-3/4" self tapping star bit screws
  • 5" caster wheels with screws for attaching
  • wood glue
Work out the boards to buyOpens this cut list in the calculator: board count, where to cut each one, and what is left over.

Step by step

01

Step 1

Build the frame with 1-3/4" self tapping star bit screws and glue, three screws per joint.

Factory Cart Coffee Table, step 1
02

Step 2

Adjust the frame for square by taking opposite diagonals and pushing the longer diagonal corners together until the two diagonals match. Add the corner bracing to square up the coffee table as shown.

Factory Cart Coffee Table, step 2
03

Step 3

Flip over and add the center support of the tabletop boards as shown.

Factory Cart Coffee Table, step 3
04

Layout the tabletop boards, so the curve downward at ends. Keep an even gap on all four outsides.

Screw down with two screws per joint.

Factory Cart Coffee Table, step 4
05

Step 5

Attach caster wheels to the base.

Factory Cart Coffee Table, step 5
06

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.