Narrow Console Table [Modern Farmhouse Collection]

This gorgeous narrow console table fits anywhere! It's simple design works with most styles, and it's easy to build for about $30! Uses all whitewood 1x boards, and nailed together. No plywood, no pocket holes, no screws.

Narrow Console Table [Modern Farmhouse Collection]

Dimensions

Use the size-specific shopping and cut lists below.

Narrow Console Table [Modern Farmhouse Collection] dimension diagram 1

What you need

  • 1 - 2x4 @ 10 feet long
  • 2 - 1x4 @ 8 feet long (you'll need to divide the cuts out equally between the two 1x4s to make it work)
  • 1 - 1x10 @ 6 feet long
  • 1-1/4" and 2" brad nails
  • wood glue

Step by step

01

Start by building the top portion of the leg.

Make sure the 45 degree joints meet up perfectly with the leg and the top 2x4 - if the angled piece ends up being a little long or a little short it won't matter. What does matter is they are attached at 45 degrees to the leg. Use the carpenter's square to make sure the top is at a right angle to the leg. Use glue with all nailed joints.

Narrow Console Table [Modern Farmhouse Collection], step 1
02

Step 2

Attach the leg to one of the 1x10 boards, centers matching.

Narrow Console Table [Modern Farmhouse Collection], step 2
03

Step 3

Add the angled supports, making sure the 45 degree joints are perfect (again, if the ends of the angled pieces are too long or too short and don't meet exactly with the edge of the 1x10, this is NOT a big deal). You can use a level to make sure everything is attached plumb, or a carpenter's square to check that the leg is being attached to the top at a 90 degree angle. Once the angled supports are attached, it will be difficult to adjust.

Narrow Console Table [Modern Farmhouse Collection], step 3
04

Cut the 1x4 pieces to match the width of the 1x10.

Attach with 1-1/4" brad nails and wood glue.

Narrow Console Table [Modern Farmhouse Collection], step 4
05

Step 5

Cut the 1x4 boards for the front trim and nail on with 1-1/4" brad nails and glue.

Narrow Console Table [Modern Farmhouse Collection], step 5
06

Flip the project over.

Nail 1x4 trim to the ends of the top 1x10 with glue and 1-1/4" brad nails. Attach to the 2x4 top with 1-1/4" brad nails and wood glue

Narrow Console Table [Modern Farmhouse Collection], step 6
07

Step 7

Finish the front by adding the 1x4 with 1-1/4" brad nails and wood glue.

Narrow Console Table [Modern Farmhouse Collection], step 7
08

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.