Outdoor Daybed with Canopy

Create a backyard retreat by building your own outdoor daybed with canopy designed to fit a standard twin mattress. This plan uses standard off the shelf lumber and basic tools to construct. Check out the step by step diagrams and materials list.

Outdoor Daybed with Canopy

Dimensions

Use the size-specific shopping and cut lists below.

Outdoor Daybed with Canopy dimension diagram 1

What you need

  • 13 - 2x4 @ 10 feet long
  • 2 - 2x6 @ 10 feet long
  • 2 - 2x2 @ 8 feet long
  • Use leftover 2x4s, 2x2s and 2x6s for the mattress slats @ 39" (cut to fit)

Step by step

01

Side Panels

Build your side panels as shown above. Drill two 1-1/2" pocket holes on both ends of all horizontal boards shown. Attach to the legs with 2-1/2" pocket hole screws. Build 2 side panels. Pocket holes can be filled with plugs or exterior appropriate wood filler.

Outdoor Daybed with Canopy, step 1
02

Step 2

Drill two pocket holes on each end of all the horizontal boards shown. Drill three per end for 2x6 boards. Attach to the legs with 2-1/2" pocket hole screws. Keep pocket holes on insides to keep hidden.

Outdoor Daybed with Canopy, step 2
03

Step 3

Attach 2x2s to back side of daybed with 2-1/2" self tapping exterior screws, flush to back edge.

Outdoor Daybed with Canopy, step 3
04

Attach back slats to the 2x2 with 2-1/2" screws.

You can also attach from outside of leg with 2-1/2" screws.

Outdoor Daybed with Canopy, step 4
05

Step 5

Complete the trim out of the back by adding 2x2s and 2x4 cap with the 2-1/2" screws.

Outdoor Daybed with Canopy, step 5
06

Attach 2x4 cleats inside the 2x6 bed aprons with 2-1/2" screws every 8" approximately.

Measure and cut the slats to fit. Lay on the cleats and screw down with 2-1/2" screws.

Outdoor Daybed with Canopy, step 6
07

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.