Rustic Storage Bed with Doors

DIY rustic storage bed.

Rustic Storage Bed with Doors

Dimensions

Use the size-specific shopping and cut lists below.

Rustic Storage Bed with Doors dimension diagram 1

What you need

  • 7 - 2x2x8
  • 1 - 2x4x10
  • 4 - 1x3x8
  • 1 - 1x12x8
  • 1 - 1x12x4
  • 1 - 1x8x8
  • 7 - 1x3x8 furring strips for slats
Work out the boards to buyOpens this cut list in the calculator: board count, where to cut each one, and what is left over.

Step by step

01

Step 1

Build two of the ends as shown in diagram.

Rustic Storage Bed with Doors, step 1
02

Step 2

Attach slats to back side. Start on outside and work inward - if you end up with a gap, the center board will cover it:)

Rustic Storage Bed with Doors, step 2
03

Step 3

Next, frame out the two sides.

Rustic Storage Bed with Doors, step 3
04

Step 4

Attach the two side frames to the end panels.

Rustic Storage Bed with Doors, step 4
05

Step 5

Rustic Storage Bed with Doors, step 5
06

Step 6

Section off the inside of the bed with 1x12s (or you could use 2x12s for additional support. If you don't have a pocket hole jig, get one, but for now, you can offset the center joint so you can attach from the outside easily.

Rustic Storage Bed with Doors, step 6
07

Step 7

Attach slats on top of partitions. Attach to sides of bed as well with 3/4" pocket hole and 1-1/4" pocket hole screws (only need one per slat). You could also screw from outside or attach a small cleat underneath slats and rest slats on top (2x2 recommended).

Rustic Storage Bed with Doors, step 7
08

Step 8

For finishing tips from Brooke and hardware source, please visit Brooke here.

Rustic Storage Bed with Doors, step 8
09

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.