Simple Planked Wood Bed

Easy DIY how to build a simple planked wood bed. Free.

Simple Planked Wood Bed

Dimensions

Use the size-specific shopping and cut lists below.

Simple Planked Wood Bed dimension diagram 1

What you need

  • 2 - 1x6 @ 8 feet long (cut planked headboard pieces from these boards)
  • 2 - 1x6 @ 6 feet long (bed siderails)
  • 3 2x4 @ 8 feet long
  • 1 - 2x6 @ 8 feet long
  • Additional 2x material for bed slats (can use scrap 2x4, 2x6 etc)

Work out the boards to buyOpens this cut list in the calculator: board count, where to cut each one, and what is left over.

Step by step

01

Step 1

Build the headboard with Kreg Jig, keeping all pocket holes on back side.

Simple Planked Wood Bed, step 1
02

Step 2

Attach legs to headboard panel.

Simple Planked Wood Bed, step 2
03

Step 3

Build end board.

Simple Planked Wood Bed, step 3
04

Step 4

Attach siderails to headboard and footboard. You may wish to finish the bed first and then move into the room, and then attach siderails.

Simple Planked Wood Bed, step 4
05

Step 5

Simple Planked Wood Bed, step 5
06

Step 6

Place slats in bed and screw down with 2" screws.

Simple Planked Wood Bed, step 6
07

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.