Stackable Wood Cake Stand

Display your cake and cupcakes with this easy to build wood cake stand plan. Featuring two tiers with no overhangs, these wood cake stands nest together for storage, and can be used as risers individually or stacked. Using pine 1x4s, create a rustic display for cakes and cupcakes. from Related: 1x3 Cake Stand Plans (not as tall and less expensive to build).

Stackable Wood Cake Stand

Dimensions

Use the size-specific shopping and cut lists below.

Stackable Wood Cake Stand dimension diagram 1

What you need

  • Smaller Cake Stand
  • 1 - 1x4 @ 6 feet long
  • 1-1/4" brad nails
  • wood glue
  • wood stain
  • Larger Cake Stand
  • 1 - 1x4 @ 6 feet long
  • 1 - 1x4 @ 8 feet long
  • 1-1/4" brad nails
  • wood glue
  • wood stain
Work out the boards to buyOpens this cut list in the calculator: board count, where to cut each one, and what is left over.

Step by step

01

Step 1

Use 1-1/4" brad nails and wood glue to build the bases for the cake stands. Three nails with glue per corner is good. Adjust so the frames are square.

Stackable Wood Cake Stand, step 1
02

Layout the top decking boards on top.

Attach to base with 1-1/4" brad nails and glue, around the entire perimenter.

Stackable Wood Cake Stand, step 2
03

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.