Stair Baluster Outdoor Console Table

to build an outdoor console table using stair balusters for legs!

Stair Baluster Outdoor Console Table

Dimensions

Use the size-specific shopping and cut lists below.

Stair Baluster Outdoor Console Table dimension diagram 1

What you need

  • 4 - Stair Balusters (as shown 34" tall x 1 1/4" x 1 1/4")
  • 2 - 1x3 @ 8 feet long
  • 5 - 1x4 @ 8 feet long
  • 1 1/4" pocket hole screws
  • exterior wood glue
Work out the boards to buyOpens this cut list in the calculator: board count, where to cut each one, and what is left over.

Step by step

01

Step 1

Build the top as shown here. Clamp each joint as you attach to get the smoothest top.

Stair Baluster Outdoor Console Table, step 1
02

Step 2

Build bottom shelf, only this time, notch out for legs.

Stair Baluster Outdoor Console Table, step 2
03

Step 3

Start by attaching end aprons to the two legs each. Then attach front/back aprons to the two leg sets. Don't forget to drill pocket holes in aprons facing upward for attaching tabletops in later steps.

Stair Baluster Outdoor Console Table, step 3
04

Step 4

Attach top and shelves to frame.

Stair Baluster Outdoor Console Table, step 4
05

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.