Wood Tic Tac Toe Gift Box Set
DIY Wood Tic-Tac-Toe gift set tutorial!

Dimensions
Use the size-specific shopping and cut lists below.

What you need
- 3 feet of 1x4 boards (could also use 1x3s)
- 2 - 9-1/2" x 9-1/2" pieces of 1/4" plywood
- 30" of 2x2s
Unfinished 1-1/4" wood doll heads (try hobby store like Joanns in wood section)
Wood dowels for attaching doll heads in matching size
- 2 - 1x4s (1x3s work too) @ 8"
- 2 - 1x4s (1x3s work too) @ 9-1/2"
- 2 - 1/4" plywood @ 9-1/2" x 9-1/2" (for open top box, just cut one)
- 2 - 1x2 @ 8" (inside cleats for lid) - cut a tiny bit shy so it fits easily inside the wood box frame
- PIECES
- 10 - 2x2 @ 2-1/2"
- 10 - 1-1/4" doll heads
GAME BOX
small dowels to attach dowel heads to wood blocks
Step by step
Step 1
Build your box out of the 1x4 boards. You can glue and nail.

Step 2
Attach bottom with glue and nails to the 1x4 frame. If you are making an open top game, paint the nine squares on the bottom. Jaime has a trick here.

Step 3
For a lidded box, attach 1x2s to underside or remaining 1/4" plywood piece, inset about 3/4" (a little more for easy placement) with 3/4" finish nails and glue. Paint game board on top as shown in step 2.

Step 4
Cut game pieces and attach heads per Jaime's tutorial here. Paint or stain and finish.

Step 5

Step 6
Wrap with a bow and give as a gift!

Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.



