Simple 1x12 Bench or Bedside Table
Very simple, easy to build and customize bench with storage shelf. Can be used in an entryway, bedroom, as a plant stand, as an side table, or anywhere you need an accent piece with a little storage and surface area.

Dimensions
Use the size-specific shopping and cut lists below.

What you need
- 1 - 1x12 @ 8 feet long
- 1 - 1x4 @ 4 feet long
- 2 - 1x12 @ 17-1/4" (legs)
- 1 - 1x12 @ 18-1/2" (bottom shelf)
- 1 - 1x12 @ 24" (top)
- 2 - 1x4 @ 24" (side trim)
- measuring tape
- square
- pencil
- safety glasses
- hearing protection
- circular saw
- jigsaw
- nailer
Step by step
Step 1
Use a jigsaw to cut out the bottoms of the two sides using the dimensions in the diagrams above to guide you.

Step 2
Attach the shelf and top to the legs. You can use nails and glue (1-1/4" - 2" in length recommended) or pocket holes if you have a Kreg Jig (3/4" pocket holes and 1-1/4" pocket hole screws). If you do use pocket holes, attach the top first because once the shelf is in place you won't be able to fit your drill inside.

Step 3
Use 1-1/4" finish nails and glue to attach the side support pieces to the top and legs. This piece ties everything together.

Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.



