Simple Play Kitchen Stove
This cute little stove is easy to make and will thrill little ones for years to come. Solid wood. Can also be used as a nightstand or a play dishwasher.

Dimensions
Use the size-specific shopping and cut lists below.

What you need
- 1x2
- 4 - 2" to 3" wooden discs (found at Joanns or Michaels for wooden wheels on toy trucks in the wood section)
- 1 - 10" bar pull
- 1 - 10 x 12 piece of plexiglass, used for picture frames (found at Home Depot and Lowes with the plexiglass sheets, should be under $1)
- 1 - set of self closing hinges (should be about $2 at Home Depot)
In addition to the supplies you need for the sink, also pick up: • 1x4
- 2 - 1x2 @ 14" 2 - 1x4 @ 12"
- measuring tape
- square
- safety glasses
- hearing protection
- drill
- nailer
- sander
Step by step
Step 1
Build the sink.

Step 2
Use 2 1/2" nails to nail through the sides of the 1x2 into the edge of the 1x4, as shown above. Nail on all four sides. You can also use pocket hole screws (recommended) or carefully predrill a pilot hole with a countersink bit and attach. Not comfortable with that? A few cheap brackets could do the trick too.

Step 3
Drill a hole in the plexigalss where each screw will go to prevent the plexiglass from cracking. Then use 3/4" screws to screw the plexiglass to the door frame as shown above. Many of our brilliant readers use mirror clips to hold the plexiglass in place.

Step 4
Add the handle as shown above. Be creative!

Step 5

Finishing
Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.



