Smith Media Wall: Side Hutch

from to build a side hutch for a full media wall. Matching base plan s, center console and center hutch plans are available too.

Smith Media Wall: Side Hutch

Dimensions

Use the size-specific shopping and cut lists below.

Smith Media Wall: Side Hutch dimension diagram 1

What you need

  • 1/2 sheet of 3/4” plywood ripped into strips 15 3/4” wide (referred to as 1x16 in this plan)
  • 1/2 sheet of 1/4” plywood
  • 2 - 1x2 @ 8 feet long
  • 12 feet of 1x3 boards for doors
  • 31” of 3 1/4” base moulding
  • NOTE: If you are making multiple pieces in this collection, you may be able to use less plywood by using up scraps.

    The pictured media center was put together with 1 1/4" pocket hole screws and face frames were nailed on with 1 1/4" finish nails.

Step by step

01

Step 1

Start by building the box. If you are doing adjustable shelves, drill shelf pin holes.

Smith Media Wall: Side Hutch, step 1
02

Step 2

Now if you are building two hutches for either side of the center console, the crown will need to extend on opposite sides for each base. In other words, you will need to make the hutches in mirror. So attach base supports so the top overhangs are in mirror.

Smith Media Wall: Side Hutch, step 2
03

Step 3

Attach back with glue and 1 1/4" finish nails.

Smith Media Wall: Side Hutch, step 3
04

Step 4

Build face frames separately - again in mirror - and then attach to front of cabinet.

Smith Media Wall: Side Hutch, step 4
05

Step 5

Smith Media Wall: Side Hutch, step 5
06

Finishing

Sand all surfaces, starting with a medium grit and finishing with fine. Wipe off the dust, fill any holes or gaps with wood filler, and sand smooth once dry. Apply primer if you're painting, then finish with your choice of paint or stain and seal with a durable clear topcoat. For outdoor projects, use exterior-rated primer, paint or stain, and sealer so the piece stands up to the weather.